Cooling System Pressure Tester Vacuum Purge & Refill Kit MY-AC01 | Sunbright
Cooling system pressure tester, purge & refill kit for the vehicle air conditioner, cooling system refill coolant.
Cooling System Pressure Tester Vacuum Purge & Refill Kit MY-AC01
MOQ: 1 pack
Packing: 1 pack contains 10 cases,1 kit in a blow mold case.
How to use:
•Please empty water of radiator. Choose a suitable rubber bush and place it between cooling system adaptor and radiator tightly. (see figure 1)
•Connect cooling system adaptor to vacuum pump and connect shop air to air connector. Then turn on the switch. (see figure 2)
•Allow air pressure to reach a vacuum level approximately between 20~25 inHG (50~60 cmHG) of mercury. Please turn off the switch and take off the vacuum pump. (figure 3)
•Connect coolant hose to cooling system adaptor and then turn on the switch. The coolant hose should have filled with coolant and put in the container which filled with coolant. After minutes, the coolant will flow to the radiator via coolant hose until the needle points zero. (see figure 4) When you finish all the work, check if the radiator is fully filled with coolant or not. If it isn’t, please fill the coolant yourself until the radiator is full of coolant.
Cooling system pressure tester: to pump radiator and cooling system to vacuum by this tool.
Use the vacuum to fill with new coolant into the radiator.
Furthermore, do not remain air in radiator and cause bad circulation.
The information collected below will not be shared with third parties as we respect your privacy. It will only serve as reference to identify your business type before we are able to issue you a formal product or volume price information.