Bearing Puller MY-PB22
Packing: 5 sets in a carton
For pulling jobs requiring an internal pull, such as pilot bearings.
Four collets which fit a wide range of applications.
Select the appropriate sized collet by comparing it with the application.
Insert collet, expand it to fit the hole, and attach the slide hammer assembly.
3 pound slide hammer with T-handle
Four Collet Sizes
Bearing Extractor 1: 3/8″ to 1/2″ (10mm-14mm)
Bearing Extractor 2: 9/16″ to 11/16″ (15mm-19mm).
Bearing Extractor 3: 5/8″ to 1″ (18mm-25mm).
Capacity From 3/8″ (10mm) To 1-1/4″ (32mm)
For Pulling Out Evenly Without Damage
The Sunbright Internal bearing puller kits are designed for dismounting bearings from housings, where the fit is on the outer ring. The pullers are constructed for optimum strength and durability and suit a wide range of bearing bore diameters.
Suitable for professional and DIY use.
Split type collet type blind/inner/bearing puller
The chuck is made of chrome molybdenum steel
Turn and expand to grab the inner bearing race.